CN MAG-MV
Pump construction
Vertical construction adopts V1 IEC motor standard. Base flange designed on customer specification.
Connections:
Threaded BSP (GAS) & NPT. Flange rating per DIN Norms Class PN16 – 40 Flange rating per ANSI B16.5 Class 150 and 300 lbs
CN MAG-MV
Operating Limits
– Max viscosity: 200 cSt
– Max system pressure:
16bar (standard)
150bar (HP Version)
Higher pressure version
available on request.
– Flow up: to 500 mc/h
– Head up: to 120m
– Temperature range:
from -185 °F (-120 °C)
to +482 °F (+250 °C)
– Electric motors:
from 1,5kW
up to 500kW
– Maximum lenght: 7 meters
The separation of liquid chamber/ atmosphere by means of an isolation shell is the best solution to pump aggressive, explosive and toxic liquids, hydrocarbons, heat transfer liquids and liquids difficult to seal. The hermetic sealless is the best solution for the chemical, pharmaceutical and petrochemical industry.
A wide range of pumps covers the different performances.
Epoxy primer and poly-acrylic enamel water-based painting for the best quality resistance linked to the environmental respect.
RWP QUICK CHANGE CARTRIDGE KIT
to guarantee an easy and fast maintenance.
– Custom design base plate, stainless steel, carbon steel, other materials available.
CF8M or WCB Pump Casing & Impeller High quality casting components.
Other materials :
– Hastelloy® C276,
– Incoloy® 825,
– Duplex,
– Others available on request.
Field assembling of the product lubricated bearing arrangement
does not require special tools.
Bearing materials are available in four different types to provide the best solution for each application: Silicon Carbide (SSIC), Tungsten Carbide (WC), Special Carbon to allow a dry running situation and PTFEC/G for any applications where the Special Carbon cannot be used.
The adoption of elastic rings reduces the sleeve bearing loads and the thrust bearing loads to the minimum, to guarantee many years of maintenance-free operation.
