The 3S three screw pumps consist of a broad range of low maintenance pumps for lubricating, non-abrasive and chemically inert liquids. 3S pumps are the best choice in many various industrial applications.
A Universal Design
The 3S Three Screw Pumps has be thoroughly engineered and is applicable for a variety of applications. With a range consisting of 29 different pump sizes with delivering rates ranging from 5 – 2.900 l/min @ 1450 rpm the 3S Three Screw Pumps Series is one of the most comprehensive three-screw pump ranges available on the market. The individual pump sizes are available in several executions, which ensures a high degree of flexibility when specifying a pump for specific system designs.
Low Maintenance
The 3S Three Screw Pumps Series pump is designed with a lifetime-lubricated external ball bearing with an expected lifetime of 30.000 hours. With a weep hole just between the shaft seal and the bearing, preventing accumulation of residue the bearing is well protected. The ball bearing is not exposed to the pumped liquid. The mechanical seal is well lubricated and cooled. The seal is designed to efficiently dissipate frictional heat.
Magnetic Coupled Version
The 3S Pumps are also available in a magnetic coupled version. The pump is hermetically sealed and the liquid cannot escape or react by coming into contact with other materials.
3S Three Screw Pumps Applications
The 3S Series consists of a broad range of pump sizes for lubricating, non-abrasive oil based liquids. 3S Pumps are used in marine and industrial applications. The applications are used in such manner;
- Feed and circulation pumps for fuels and lubricants
- Lubricant and coolant pumps for gears, engines and hydraulic systems.
- Feed and transfer pumps for oil burner technology
Benefits
The highlighted key benefits significant to the 3S Pump design are;
- Minimized lifecycle cost
- Low-maintenance & Long lifetime
- High Quality
- Environmentally Friendly
- High Volumetric Efficiency
- High Energy Efficiency
- Low Noise
- Low Pulsation
- Pumping without violent turbulence
- Excellent Suction Conditions (NPSH)
Technical Data
| Materials | |
| Pump Casing | Nodular cast iron , EN-GJS-400 |
| Screws | Nitration-hardened steel, 1.7139 |
| Seal Faces, Mechanical Seal | SiC/Hard Metal |
Port Connections
Flanges PN16 according EN 1092-1 type B1/B2, in inline configuration or at the top. For 3S BT and 3S VT special counter flanges are required. A special flange design is used with 3S BS pumps.
Motors
According to IEC Metric Standard;
| Type | Power (rpm) at 50Hz | Power (rpm) at 60Hz |
| 2 Poles | 2,900 | 3,500 |
| 4 Poles | 1,450 | 1,750 |
| 6 Poles | 950 | 1,200 |
*IP55, insulation class ICLF, efficiency class IE2
Design
3S casings are made of nodular graphite, EN-GJS-400, and screws are of nitrated steel 1.7139. High quality mechanical seal with special SiC graphite material as standard.
3S pumps are available in several executions, e.g. with free shaft end, as a unit on bracket foot or vertical pedestal. Furthermore, each pump size is available in inline as well as top flange design.
The basic principle of the 3S screw pump is that the turning screws isolate fluid and convey it. The conveyance thus takes place through the axial displacement of closed volumes.
The rise in pressure is directly related to the length of the screws.
Operating Principle
3S Three Screw Pumps are rotary positive displacement pumps. By the meshing of the three rotating screws and the enclosing pump casing the displacement effect is created. The screws are radially supported by the sliding contact in the casing, which requires lubrication by the pumped liquid. The axial support of the main screw is carried out by a ball bearing.
The pump is equipped with an internal relief valve which will limit the differential pressure and protect the pump from excessive pressure. On the Alfa Laval 3S pump the valve setting is adjustable to different opening pressures.
Alfa Laval three screw pump data sheet
Upgrade to the 3S Three Screw Pumps for high-efficiency, low-maintenance pumping solutions. Contact our team today to find the perfect pump configuration for your system.
